Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Resynchronise the Remote of a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

In this video, see how to resynchronise the key remote of a Ford Focus MK2; note that this does not indicate how to reprogram the chip, but only how to synchronise the key with the vehicle. Insert the key into the ignition and turn it to position two four times.

This will enter a "programming" mode, indicated by a "beep". Immediately press the unlock button, and this should activate the key. Then quickly turn the ignition on and off, and the procedure is complete. The YouTuber shows the entire process very quickly, which resolves successfully.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of a Ford Focus
How to Replace the Key Fob Battery of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you replace the key fob battery of a Ford Focus? Follow these steps. Take your key fob and use a screwdriver to pry around the cover cap (remo…
How to Replace the Key Battery on Ford Focus MK2
How to Replace the Key Battery on Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) Let's discover in this video how to dismantle and replace the battery of the remote key on the second generation Ford Focus. First, take your remote …
Replacing the Key Fob Battery on a Ford Focus Mk2
Replacing the Key Fob Battery on a Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, see how to disassemble and replace the battery of the key fob on a second-generation Ford Focus by following these simple ins…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos