Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 7
- Years 2006-2014 Let's see how to install the roof bars on the Ford Transit. Remove the bars from the packaging and attach the rubber feet to the three mounts that we will use to fix the bars, filling them with silicone. Insert the three screws into the bar and position it on the roof, aligning it with the mounting holes. Tighten the screws using a hex key and install the protective caps on the holes. Repeat the process on the other side. Take the crossbars and widen the clamps, position them horizontally on the bars at the desired height, and secure them by tightening the appropriate screws.
Posted on 30 December 2023 by ScegliAuto
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |