Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear light bulb of the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

In order to replace the rear light bulb of the Ford Focus, you need to open the rear tailgate of the car and locate the screws that secure it from the inside: these will be found one on the upper side and one on the lower side covered by the respective panel. Once the screws have been loosened, it will be possible to remove the light assembly from inside its housing and disconnect the connector: this way, the bulb inside the headlight can be removed and replaced with a new one. After the replacement, it will be possible to reassemble the headlight, securing it with the appropriate screws.

Posted on 31 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on a Ford Focus
How to replace the rear light bulb on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before we can begin, we will have to open the tailgate of our Ford Focus. So let's start by unscrewing the fixing screws of the rear light. Next, we …
How to change the Ford Focus rear fog light bulb
How to change the Ford Focus rear fog light bulb
Ford Focus (1998-2004 / MK 1) Let's see in this short and simple guide how to remove and replace the Ford Focus rear fog light bulb, following the instructions below. First of all…
How to remove the reverse light bulb of a Ford Focus
How to remove the reverse light bulb of a Ford Focus
Ford Focus (1998-2004 / MK 1) Before we can begin, we will have to go to open the rear hatch of the trunk of our Ford Focus. So let's start by unscrewing and removing the screws t…

Other guides you may be interested in

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos