Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Ford Ranger?

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Key

In this tutorial, you will see how to replace the battery in the key fob of a Ford Ranger, a very simple and quick operation. You will need a CR2450 battery and a small flathead screwdriver. First, extract the emergency metal key by pressing the designated button, then insert the key or screwdriver into the newly exposed slot, lever it open, and access the rear cover. At this point, remove the old battery, insert the replacement while respecting the polarity, and reassemble everything by following the reverse procedure.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery in the Ford Ranger remote control?
How do you replace the battery in the Ford Ranger remote control?
Ford Ranger (2011-2023 / T6, P375, PX) To replace the battery of the Ford Ranger remote control, you need to press the button located on the top of the device, so that the key can be remov…
How to replace the battery of a Ford Ranger key
How to replace the battery of a Ford Ranger key
Ford Ranger (2011-2023 / T6, P375, PX) Replacing the battery of the Ford Ranger key is a procedure that can be done in three simple steps. The first step involves removing the metal part o…
How to replace the battery of the Ford Ranger car remote.
How to replace the battery of the Ford Ranger car remote.
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the battery of the 2014 Ford Ranger remote control. To perform this simple operation, we will need a flathead sc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos