Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Passenger Sun Visor on a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

In this tutorial, you will learn how to replace the sun visor on a Ford Focus MK3, a very simple and quick operation. First, lower the visor. Then, use a flat-head screwdriver to remove the two small plastic caps indicated. Next, unscrew the exposed screws using a Torx T20 key, detach the left pin from the base by pulling it firmly towards you, and separate the visor from the roof. To fit the replacement, simply follow the reverse procedure. The same operation can be performed similarly on the driver's side.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Ford Focus 3
How to replace the cabin air filter of the Ford Focus 3
Ford Focus (2011-2018 / MK 3) In this new guide dedicated to all of you who own a Ford Focus Mk3, we will describe all the necessary steps to replace the cabin air filter on your …
How to Replace the Sun Visor Light Bulb on a Ford Focus
How to Replace the Sun Visor Light Bulb on a Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the sun visor light bulb on a Ford Focus is a very simple operation that requires only two steps and no specific tools. First, purchase a 1…
How to Replace the Cabin Fan in a Ford Focus?
How to Replace the Cabin Fan in a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will see how to replace the cabin fan in a Ford Focus. Before proceeding, ensure that the key is not in the ignition for safety…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos