Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Ford Fiesta Front Emblem

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Checks and maintenance

This video demonstrates how to replace the front logo of the Ford Fiesta. You will need a flathead screwdriver, a cloth with alcohol or a degreaser to remove the adhesive. To replace the front logo of the Ford Fiesta, gently pry with a flathead screwdriver, being careful not to damage the grille or bumper, as the logo is attached with double-sided adhesive. Once the old logo is removed, clean off any excess adhesive. After cleaning the housing, insert the new logo by removing the protective layer of the adhesive and press down with your fingers to ensure the adhesive adheres well in all areas.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Disabling the airbag is a maneuver that should obviously be carried out in certain occasions, such as malfunction checks, replacements, etc. Otherwis…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the door of your Ford Fiesta. First, unclip and remove the side cover of the screw that secures the handle and the lock to the …
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can begin, exit the cabin of your Ford Fiesta and head to the antenna. Start by unscrewing the antenna from its housing. By doing this, yo…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos