Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on a Ford S-Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Tail light bulb

Here’s how to replace the bulbs inside the lights located on the tailgate of the Ford S-Max. Open the tailgate and position yourself in front of the light where the bulbs need replacing; on the inner cover, you will find a cap, which when removed will expose the electrical connector that you will need to disconnect and two plastic screws to unscrew. Also, unscrew the screw located on the side, allowing you to remove the light; unscrew the two screws that secure the plate where the bulbs are housed. Replace the burnt bulb with a new one and reassemble everything in reverse order of the previous steps.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on a Ford S-Max
Removing the Rear Light on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Today, you will see how to remove the rear light and replace the bulbs on a Ford S-Max by following these simple steps. First, open the boot and remo…
Removing the Rear Light on Ford S Max
Removing the Rear Light on Ford S Max
Ford S Max (2006-2016 / MK 1) Let’s look at removing the rear light on the Ford S Max. Lift the tailgate that closes the boot, then unscrew the securing screws located at the back…
Remove the rear light of the Ford S-Max Mk2.
Remove the rear light of the Ford S-Max Mk2.
Ford S Max (2016-2024 / MK 2) The guide shows how to disassemble the rear lights of the Ford S-Max Mk2 to replace the bulbs. From the trunk, remove the plastic cover of the light …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos