Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Courier

Model: Ford Courier Brazil - Years 1998-2013
Part: Service warning light

To reset the service light related to the service interval on a Ford Courier, follow these steps: turn on the ignition and press the brake pedal for 15 seconds. When the service light starts to flash, release the brake pedal; turn off the ignition and wait for the reset to complete, approximately 2 minutes, then restart the ignition. If the light continues to flash, it may be necessary to visit a garage for a diagnostic check to identify and resolve the issue, which is usually related to the control unit.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Courier
How to reset the service light on the Ford Courier
Ford Courier (1998-2013 / Brazil) To reset the service light related to the engine oil change on a Ford Courier 2 vehicle, we need to turn on the instrument panel and the engine of th…
How to reset the service on the Ford Courier
How to reset the service on the Ford Courier
Ford Courier (1998-2013 / Brazil) In this video we can see how to reset the service light on the Ford Courier; the same applies to the Fiesta, which is essentially the same model. Fir…
Where is the fuse box of the Ford Courier located?
Where is the fuse box of the Ford Courier located?
Ford Courier (1998-2013 / Brazil) The Ford Courier has two fuse boxes inside. The first fuse box is located inside the cabin, under the steering wheel. Inside the first fuse box, you …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos