Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Ford Courier

Model: Ford Courier Brazil - Years 1998-2013
Part: Warning light – error code

In this video we can see how to reset the service light on the Ford Courier; the same applies to the Fiesta, which is essentially the same model. First, we need to close the doors; put the car in neutral and turn on the dashboard, then press the brake and accelerator all the way down for about fifteen seconds, then release both pedals completely at the same time. Turn off the dashboard, remove the key for about five seconds, reinsert the key and turn on the dashboard again, and when starting the engine we will see that the service light is now off.

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Courier
How to Reset the Service Light on a Ford Courier
Ford Courier (1998-2013 / Brazil) To reset the service light related to the service interval on a Ford Courier, follow these steps: turn on the ignition and press the brake pedal for …
How to reset the service light on the Ford Courier
How to reset the service light on the Ford Courier
Ford Courier (1998-2013 / Brazil) To reset the service light related to the engine oil change on a Ford Courier 2 vehicle, we need to turn on the instrument panel and the engine of th…
Where is the fuse box of the Ford Courier located?
Where is the fuse box of the Ford Courier located?
Ford Courier (1998-2013 / Brazil) The Ford Courier has two fuse boxes inside. The first fuse box is located inside the cabin, under the steering wheel. Inside the first fuse box, you …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos