Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the rear lock of the Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Handle
Operation: How to replace the rear lock of the Ford Fiesta

Open the door in question and carefully observe the points in which you are going to operate, you will have to remove the cap respectively in line with the handle, using any cutting tool. Once removed, insert a screwdriver with a torx insert to unscrew the bolt that blocks the handle, unscrewing it slightly you can certainly start moving the handle, in fact now you can remove the outermost part of the handle, now push the handle towards the side you have just released and in this way you will be able to extract the handle, retrace the steps backwards for reassembly.


Posted on 23 September 2023 by ScegliAuto



How to remove the door lock of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will have to go and open the door of our Ford Fiesta. So let's start by disengaging and removing the side cover of the screw that
How to disassemble the rear lock in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In this tutorial, we can see how to disassemble the rear door lock in the Ford Fiesta. First of all, we open the door in question, then we detach the
Remove the Ford Fiesta tailgate lock 5
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In today's video tutorial we will see how to disassemble and replace the lock or the boot of the Ford Fiesta fifth series, in simple steps. First of

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos