Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery of the Ford Transit

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Today, you will learn how to replace the battery of the Ford Transit. The battery we will replace is the secondary battery that powers the electrical system but not the starting.

Begin the battery replacement by removing the driver's seat. Continue by undoing the screw that secures the bracket with an 8 mm spanner; once the bracket is removed, you can disconnect the connector and then the battery terminals.

Once the positive terminal is disconnected and then the negative, you can remove the battery. Insert the new one and connect it to the connector and terminals.

Conclude the replacement by refitting the driver's seat.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

Ford Transit (2014-2024 / MK 8) You can replace the remote battery on a Ford Transit by prying open the lower part of the device, allowing you to separate the two halves of the key …
Ford Transit (2006-2014 / MK 7) In this tutorial, you will see how to replace the battery in the remote key fob of the Ford Transit van. For this simple and quick operation, you wil…
Ford Transit (2014-2024 / MK 8) If the key for your Ford Transit Mk8 has stopped working due to a completely dead battery, simply follow the procedure below to replace it with a new…

    Frequently Asked Questions

    • Transit 2014-2024 - Where is the battery in the Ford Transit? Read answer
    • Transit 2014-2024 - Where is the battery located on a Ford Transit Custom? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos