Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driver's Side Switch Panel on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Power window switch

See other generations:
Video tutorial

Repairing the driver's side window switch panel on a Ford Fiesta is straightforward. Open the affected door, which in this case is the driver's side, and use a plastic lever to remove the switch panel cover.

Once the cover is removed, extract the switches and disconnect the connectors. Then, connect the new switches to the old connectors and refit the switch panel cover.

This operation is the same for all four window switches. The cost for this operation is low, as the new switch panel costs approximately £25.00.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Window Switch on the Ford Fiesta
How to Remove and Replace the Window Switch on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Removing and replacing the window switch takes just a few minutes; here’s how to do it on the Ford Fiesta. First, open the front door of your car and…
How to Remove the Window Switch Panel on a Ford Fiesta
How to Remove the Window Switch Panel on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the window switch panel located in the driver’s door on a Ford Fiesta? This video explains how to proceed. Before starting the disassem…
How to Replace the Window Switch on the Ford Fiesta?
How to Replace the Window Switch on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the window switch on the Ford Fiesta, use a tool to lever the switch out of its housing. Once extracted, disconnect the connector attached…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos