|
Do it yourself
| |||
| ||||
How to replace the window regulator of the Ford Fiesta V
Model: Ford Fiesta
Fiesta 5, MK 5, MK V
- Years 2002-2008
Let's see how to replace the window regulator of a Ford Fiesta V: first of all, we need to remove the inner panel from the door, starting from the screw of the inner handle, then we will remove the panel located in the inner part of the side mirror. Now it's time for the two screws located under the panel; then we will remove the cover of the inner handle and unscrew the screws located underneath and disconnect the electrical connector of the window regulator. Now we can remove the panel. Let's look at the motor, from which we remove the electrical connector, then we unscrew the three bolts around what looks like a gear, and by doing so we have removed the motor from the window. In this case, the plastic is completely worn out so we will have to replace the whole piece. We can easily find it on eBay, for example with the code 351807476608 at the price of 49.39 euros, with free delivery, but used parts can easily be found online for about half the price.
Posted on 10 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Replacing the battery inside your Ford Fiesta key is very simple. To complete the operation, just read the following guide and apply the described pr…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Before you can begin, exit the cabin of your Ford Fiesta and head to the antenna. Start by unscrewing the antenna from its housing. By doing this, yo…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |