Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : How to remove the door panel of the Ford C Max

Ford C Max - Video tutorial

Model: Ford C Max MK 2 - Years 2010-2019
Part: Door panel
Operation: How to remove the door panel of the Ford C Max

When we need to perform maintenance on the speakers of our vehicle, it is necessary to remove the door panel. Today we will explain how to remove the door panel on a Ford C Max vehicle. We start by opening the door and removing the inner part of the handle, then we unscrew the central screw. We continue the removal of the panel by removing the central body of the window switch panel in order to unscrew the central screws. We conclude the removal by unscrewing the lower screw and then the side one, then we detach the panel by pulling upwards and then disconnect the central connector.


Posted on 16 May 2024 by ScegliAuto



How to remove the door panel of a Ford C Max
Ford C Max (2003-2010 / MK 1) How to remove the door panel of a Ford C Max? Let's see how to proceed. Before starting the disassembly work, let's disconnect the battery terminals
How do I remove the door panel from the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In order to remove the door panel of the Ford C-Max you must first remove the red cap at the bottom to be able to loosen its screw underneath. Togeth
How to remove the rear door panel of a Ford C max
Ford C Max (2003-2010 / MK 1) How to remove the rear door panel on our beautiful Ford C max? This video explains how to proceed. Before starting the disassembly work, let's discon

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos