Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker from a Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

Here’s how to remove the speaker from a Ford C Max after removing the door panel. Before starting the disassembly, disconnect the battery terminals located in the boot.

Begin disassembly: use a lever to remove the plastic above the handle, then use a screwdriver to unscrew the fastening screws located in the plastic handle and in the area of the door opening lever. Once all screws are removed, use the lever to detach the window switch panel and all plastic clips securing the door.

Pull the door panel away by hand, disconnect any power connectors and release cables. Unscrew the screws or rivets (with a drill) securing the speaker embedded in the door; remove it and disconnect the power connector.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Ford C Max
How to Remove the Door Panel on a Ford C Max
Ford C Max (2003-2010 / MK 1) How to remove the door panel on a Ford C Max? Here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the…
How to Remove the Rear Door Panel of a Ford C-Max
How to Remove the Rear Door Panel of a Ford C-Max
Ford C Max (2003-2010 / MK 1) How do you remove the rear door panel on your stunning Ford C-Max? This video explains how to proceed. Before starting the disassembly work, disconne…
How to Remove the Radio from a Ford C Max
How to Remove the Radio from a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the radio from a Ford C Max to install a new one? This is not too complicated; here's how to do it. Insert the keys into the slots at the co…

Other guides you may be interested in

    Frequently Asked Questions

    • C Max 2010-2019 - Why is the tire sensor not detected on the Ford C Max? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos