Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

This useful video guide shows the entire procedure necessary to reset the service light, which indicates the remaining life of the engine oil, on a Ford Focus Ecoboost, model produced from 2011 to 2018. First, press and hold both the brake and accelerator pedals simultaneously, then turn on the vehicle's ignition without starting the engine.

You will see a notification on the information display indicating that the reset is in progress, so continue to hold the pedals for about 15 to 20 seconds until the reset completed notification appears.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Ford Focus
How to reset the service light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will explain how to reset the service light on Ford Kuga, Ford Mondeo, Ford Fiesta, and Ford Focus vehicles. Specifically, today we will see…
How to Reset the "Service" Light on a Ford Focus
How to Reset the "Service" Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) Before you can start, sit in the driver's seat of your Ford Focus. Begin by pressing and holding the brake and accelerator pedals, while activating t…
How to Perform the Service Reset on a Ford Focus
How to Perform the Service Reset on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This very short video tutorial shows how to reset the service light, which indicates the remaining life of the engine oil, on a second-generation For…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What does the airbag warning light on Ford Focus indicate? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos