Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service of a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

In today's tutorial, we can see how to reset the service light on a Ford Focus 3. Let's start the reset operation by turning on the car's ignition to the second position without starting the engine, then press and hold down the accelerator pedal and then the brake pedal as shown in the video. After doing this, we will see a notification on the information display indicating that the reset is in progress, so continue to hold down both pedals for a few seconds until the notification of reset completed appears to finish the job.

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2016 Ford Focus
How to Reset the Service Light on a 2016 Ford Focus
Ford Focus (2011-2018 / MK 3) Manually resetting the service light on your 2016 Ford Focus is straightforward. Enter the vehicle and sit in the driver's seat. Press the brake and …
How to reset the service light on the Ford Focus 2
How to reset the service light on the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) To complete the reset procedure of the service light on your Ford Focus Mk2 correctly and safely, it takes less than a minute. Let's find out togethe…
How to reset the service light on a Ford Focus
How to reset the service light on a Ford Focus
Ford Focus (2011-2018 / MK 3) To reset the service light on a Ford Focus, get in the car and close all the doors. Insert the key and turn the ignition to the ON position without s…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos