Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus water pump

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Pump
Operation: How to replace the Ford Focus water pump

As a first operation, unhook the hood from the special lever and lift it now you will have to start removing all the parts that comprise the water circuit, including the tank in the right corner, now you will have to remove the brackets that protect the engine dampers, then prepare a safe support for the engine of your car, now after lifting the engine you will have access to the timing belt that you will have to remove by loosening its tension, then also remove the pulley that is in position of the pump, and removing the bolts that secure it you can also extract the pump concerned.


Posted on 29 September 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Focus 2011-2018 - What problems could the Ford Focus injector pump have? Read Answer
    • Focus 2004-2011 - How much is the water pump on the Ford Focus 1.8 TDCi from 2005? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos