Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Timing Belt on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Timing belt

See other generations:
Video tutorial

Prepare to remove and replace the timing belt on a Ford Focus: lift the car on a column lift or jack (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Once these steps are completed, lift the bonnet, remove the engine soundproofing panel and the timing belt cover.

Use a spanner to loosen the tensioner pulley and slide the belt off. Use a socket to unscrew the tensioner pulley bolt, then remove the water pump as shown in the video. Install the new water pump (previously removed), the tensioner, and the belt, tightening everything with the socket.

Finally, reinstall the rivets along with the wheel arch liner and remount the wheel with the tyre on the vehicle.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
Replacing the Timing Belt on the Ford Focus 1.6 Ti-VCT
Replacing the Timing Belt on the Ford Focus 1.6 Ti-VCT
Ford Focus (2004-2011 / MK 2, Focus 2) Once a certain mileage is reached, it will be necessary to remove and replace the timing belt; let’s go through the procedure for the Ford Focus 1.6 …
How to replace the timing belt on a Ford Focus?
How to replace the timing belt on a Ford Focus?
Ford Focus (2018-2025 / MK 4) Hello, today you will replace the timing belt on your Ford Focus. Start by opening the bonnet. Next, remove the air filter assembly and the engine co…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos