Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Ford Ecosport

Model: Ford Ecosport Bv226 - Years 2003-2012
Part: Battery

Replacing the battery of a Ford Ecosport vehicle does not require much time, but it is definitely an operation that must be carried out with care and patience. To perform the replacement, you will first need to remove the screw securing the battery bracket using an 8mm wrench. Then, you can disconnect the negative terminal clamp and then the positive terminal clamp. Remove the old battery and insert the new one. Connect the positive terminal first, then the negative terminal, and finish by tightening the bracket screw. Finally, start the vehicle to ensure that the replacement was successful.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery of a Ford Ecosport 2018.
Replacement of the battery of a Ford Ecosport 2018.
Ford Ecosport (2012-2023 / BK, MK 1) Today we will see how to change the battery of a 2018 Ford Ecosport. Let's start the operation by opening the hood and securing it, then, with an 8mm…
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to Replace the Battery of a Ford Ecosport
How to Replace the Battery of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Thanks to today's tutorial, we can see all the steps necessary to replace the battery of our first-generation Ford Ecosport, produced from 2012 to 20…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos