Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Ford Edge?

Model: Ford Edge MK 2, Cd539 - Years 2015-2024
Part: Tire pressure warning light

In order to reset the tire pressure light of the Ford Edge, you first need to inflate the tires until they reach the recommended pressure value: this value is indicated on the sticker attached to the driver's side door frame. Once the tires have been inflated, you can turn on the instrument panel and connect a diagnostic tool to the vehicle's OBD port: then you must follow the instructions in the tutorial to reset the light. At the end of the procedure, you must disconnect the scanner and turn off the instrument panel.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Ford Edge?
How to Reset the Tyre Pressure Warning Light on the Ford Edge?
Ford Edge (2015-2024 / MK 2, Cd539) You can reset the tyre pressure warning light on the Ford Edge by inflating the tyres correctly: the correct pressure to which the tyres should be in…
How to reset the TPMS light on the Ford Edge
How to reset the TPMS light on the Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) The TPMS (Tire Pressure Monitoring System) light on a Ford Edge vehicle activates when a tire is punctured or when we need to adjust the tire pressur…
Reset TPMS on a Ford Edge 2
Reset TPMS on a Ford Edge 2
Ford Edge (2015-2024 / MK 2, Cd539) In this brief video guide, you will see the step-by-step procedure to reset the TPMS warning light, related to tyre pressure, on a second-generation …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos