Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Key for the Geely Emgrand

Model: Geely Emgrand S MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Key

Video tutorial

To program the remote key for the vehicle, follow these steps: take the key to be programmed, access the driver's seat, and leave the driver's door open. Insert the key into the ignition switch, simulating the ignition and then turning it off six consecutive times.

At that point, remove the key from the ignition switch, and you will hear a sound. Then, press all the unlock buttons (door and trunk) on the key itself.

At this point, the remote key will be programmed.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Geely Emgrand S?
How to Change the Engine Oil in a Geely Emgrand S?
Geely Emgrand S (2016-2024 / MK 1) To change the engine oil in a Geely Emgrand S, access the components at the bottom of the engine bay: here you will find the oil drain plug, which sh…
How to Replace the Remote Battery for the Geely Emgrand?
How to Replace the Remote Battery for the Geely Emgrand?
Geely Emgrand S (2016-2024 / MK 1) As you can see in this tutorial, replacing the battery in the remote for the Geely Emgrand is an extremely simple and quick task. To do this, you wil…
Replacing the Cabin Air Filter of the Geely Emgrand S
Replacing the Cabin Air Filter of the Geely Emgrand S
Geely Emgrand S (2016-2024 / MK 1) The following steps will guide you through the disassembly and replacement of the cabin air filter, or pollen filter, of the Geely Emgrand S. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos