Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Geely
  4. : Binrui

How to Install a Dash Camera on the Geely Binrui

Model: Geely Binrui MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

Video tutorial

As shown in the video, after purchasing your dash camera, install it behind the rearview mirror by first attaching its mount with the suction cup and then the camera itself. Insert the jack into the hole and now you need to route the wire, hiding it in the car's body up to where the central controls are, as seen in the video.

Ensure you have enough cable so it doesn't pull and can be properly arranged. Once the cable reaches the pedals, you can run it under the mat so it doesn't get in the way and use clips along the side of the central part of the car to keep it secure.

Once the USB plug is inserted, your camera will turn on.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Geely Binrui (2018-2025 / MK 1) This tutorial is applicable not only to the Geely Binrui key but also to those of other models produced by this company, as they are all very similar…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos