Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Genesis G70
    4. : -board computer

Genesis G70 - -board computer

Genesis G70 (2018-2024 / MK 1)
How to reset the oil light on the Genesis G70 2023
In the following guide, we will discover together how to quickly and safely perform a manual reset of the oil light on the dashboard of your 2023 Genesis G70. …read all…
Posted on 13 March 2024 by ScegliAuto
Genesis G70 (2018-2024 / MK 1)
How to reset the oil light on the new 2022 Genesis G70
In this new guide dedicated to the world of the new 2022 Genesis G70, we will explain how to correctly perform the manual reset of the engine oil change …read all…
Posted on 9 April 2023 by ScegliAuto
Genesis G70 (2018-2024 / MK 1)
How to perform a service reset on Genesis G70
In this video tutorial we can see how you can reset the service on Genesis G70. The first thing to do is vehicle maintenance such as changing the oil filter …read all…
Posted on 18 November 2022 by ScegliAuto
Car stereo (2) Spark plugs (2) Key (2) -board computer (3) Checks and maintenance (1) Brake discs (1) Cabin air filter (2) Accessory Kit (1) Rear light bulb (1) Engine (1) Engine oil (1) Door panel (1) Front bumper (1) Brake pads (2) Door (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos