Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Genesis G90?

Model: Genesis G90 MK 2 - Years 2016-2023
Part: Key

As we can see in this tutorial, replacing the battery of the Genesis G90 remote is an extremely simple and quick operation. For this, you will need a small flathead screwdriver and a replacement CR2032 3V battery. First, press the side button and extract the emergency key. Then, use the screwdriver tip to pry in the indicated slot and separate the two halves of the remote. At this point, you can remove the old battery and insert the replacement, positioning it with the negative terminal facing you.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Fob Battery of the Genesis G90
Replacing the Key Fob Battery of the Genesis G90
Genesis G90 (2016-2023 / MK 2) Below are the steps on how to disassemble and replace the battery of the Genesis G90 key fob. First, take your key fob and start by removing the phys…
How to Replace the Key Battery on the Genesis
How to Replace the Key Battery on the Genesis
Genesis G90 (2016-2023 / MK 2) If you need to replace the key battery on this vehicle model, the following description provides the necessary instructions and information to operat…
How to Change the Key Battery of the Genesis
How to Change the Key Battery of the Genesis
Genesis G90 (2016-2023 / MK 2) To replace the battery of the remote key for your vehicle, follow the instructions below and refer to the video. First, extract the emergency key by …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos