Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console on a Genesis G80?

Model: Genesis G80 MK 2, DH - Years: 2016, 2017, 2018, 2019, 2020
Part: Center console tunnel

See other generations:
Video tutorial

To remove the center console on a Genesis G80, lift the leather boot that surrounds the gear shift and then completely remove it along with the gear shift knob. Now, use a tool to pry off the plastic cover that surrounds the center console, accessing the connectors underneath that need to be disconnected.

After the connectors are disconnected, you can completely remove the old cover: this will allow you to install the new one along with the corresponding boot and gear shift knob.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Genesis G80
How to Replace the Battery in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In this guide, learn how to remove and replace the battery in the Genesis G80 in simple, quick steps. First, open the trunk and start removing the fl…
Guide to Removing the Dashboard of a Genesis G80
Guide to Removing the Dashboard of a Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Today's main instructions will show you how to remove and replace the center console of the Genesis G80 dashboard. First, get in the vehicle and star…
How to Replace the Cabin Filter in the Genesis G80?
How to Replace the Cabin Filter in the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) To replace the cabin filter in the Genesis G80, open the glove compartment on the passenger side to release the pins inside. Once the pins are releas…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos