Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a GMC Acadia

Model: GMC Acadia MK 1 - Years 2007-2016
Part: Headlight bulb

Today, we will go through the instructions to remove and replace the low beam headlight bulb on a GMC Acadia. First, move to the front wheel well and start by removing the plastic cover to access the inside of the headlight; then disconnect the socket along with the bulb, removing the light as shown in the video. At this point, install the new low beam bulb of the correct type and with the same base; check the operation of the low beam bulb, and finally secure the plastic cover back on the wheel well.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulb on the GMC Acadia
How to Change the Headlight Bulb on the GMC Acadia
GMC Acadia (2007-2016 / MK 1) To change the headlight bulb on the GMC Acadia, start by disconnecting the negative terminal of the battery located under the rear seat mats. Remove …
How to Remove the Front Headlight of the GMC Acadia?
How to Remove the Front Headlight of the GMC Acadia?
GMC Acadia (2007-2016 / MK 1) To remove the front headlight of the GMC Acadia, completely unscrew the bolts that secure the front bumper so it can be removed. These bolts are loca…
How to Replace the Headlight Bulb on a GMC Acadia
How to Replace the Headlight Bulb on a GMC Acadia
GMC Acadia (2017-2024 / MK 2) This guide provides instructions for replacing the headlight bulb on your vehicle. Follow these steps: Lift the vehicle and turn it so that you are f…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos