Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the GMC Acadia?

Model: GMC Acadia MK 1 - Years 2007-2016
Part: Headlight

To remove the front headlight of the GMC Acadia, completely unscrew the bolts that secure the front bumper so it can be removed. These bolts are located at the top of the bumper, accessible by opening the hood, in the wheel well, and at the bottom of the bumper. This will detach the bumper from the front of the vehicle, allowing access to the bolts that secure the headlight. By unscrewing these bolts, you can extract the headlight from its housing and disconnect the connector at the back.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulb on the GMC Acadia
How to Change the Headlight Bulb on the GMC Acadia
GMC Acadia (2007-2016 / MK 1) To change the headlight bulb on the GMC Acadia, start by disconnecting the negative terminal of the battery located under the rear seat mats. Remove …
Where to Find the Main Fuse Box in the 2017 GMC Acadia
Where to Find the Main Fuse Box in the 2017 GMC Acadia
GMC Acadia (2017-2024 / MK 2) In this new guide dedicated to your second-generation GMC Acadia (2017), discover where the main fuse box is located. For safety reasons, before proc…
How do you replace the cabin filter of the GMC Acadia?
How do you replace the cabin filter of the GMC Acadia?
GMC Acadia (2007-2016 / MK 1) In order to replace the cabin filter of the GMC Acadia, you need to open the glove compartment located on the front passenger side: once opened, you …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos