Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb on the GMC Acadia

Model: GMC Acadia MK 1 - Years 2007-2016
Part: Headlight bulb

To change the headlight bulb on the GMC Acadia, start by disconnecting the negative terminal of the battery located under the rear seat mats. Remove the right front wheel well by taking out the clips (lift the clip and remove it with pliers) and unscrewing the bolts with a T20 Torx wrench. After removing the wheel well, turn the headlight bulb cap a quarter turn to remove it, release the clip that holds the bulb in place, and take out the bulb by disconnecting the connector. To install the new bulb, reverse the steps taken during disassembly.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Main Fuse Box in the 2017 GMC Acadia
Where to Find the Main Fuse Box in the 2017 GMC Acadia
GMC Acadia (2017-2024 / MK 2) In this new guide dedicated to your second-generation GMC Acadia (2017), discover where the main fuse box is located. For safety reasons, before proc…
How to Remove the Front Headlight of the GMC Acadia?
How to Remove the Front Headlight of the GMC Acadia?
GMC Acadia (2007-2016 / MK 1) To remove the front headlight of the GMC Acadia, completely unscrew the bolts that secure the front bumper so it can be removed. These bolts are loca…
How to Replace the Headlight Bulb on a GMC Acadia
How to Replace the Headlight Bulb on a GMC Acadia
GMC Acadia (2017-2024 / MK 2) This guide provides instructions for replacing the headlight bulb on your vehicle. Follow these steps: Lift the vehicle and turn it so that you are f…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos