Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a GMC Acadia

Model: GMC Acadia MK 1 - Years 2007-2016
Part: Battery

Today, we will see in this video tutorial how to remove and replace the battery in a GMC Acadia by following these simple and quick steps. First, access the rear of your vehicle and start by removing the carpet on the right side; then remove the plastic cover found under the seats and unscrew the fastening screws of the cover to access the battery compartment, as shown in the video. At this point, unscrew the nuts from the terminals (positive and negative) to remove it and replace it with a new one that has the same amperage!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Main Fuse Box in the 2017 GMC Acadia
Where to Find the Main Fuse Box in the 2017 GMC Acadia
GMC Acadia (2017-2024 / MK 2) In this new guide dedicated to your second-generation GMC Acadia (2017), discover where the main fuse box is located. For safety reasons, before proc…
How to Replace the Remote Battery for the GMC Acadia?
How to Replace the Remote Battery for the GMC Acadia?
GMC Acadia (2017-2024 / MK 2) To replace the battery in the remote for the GMC Acadia, press the button located on the side of the device so that the emergency key can be extracte…
How to Replace the Remote Battery in a GMC Acadia?
How to Replace the Remote Battery in a GMC Acadia?
GMC Acadia (2017-2024 / MK 2) As we can see in this tutorial, replacing the remote battery in a GMC Acadia is an extremely simple and quick task. To do this, you will need a flath…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos