Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a GMC Acadia?

Model: GMC Acadia MK 2 - Years 2017-2024
Part: Key

As we can see in this tutorial, replacing the remote battery in a GMC Acadia is an extremely simple and quick task. To do this, you will need a flathead screwdriver and a replacement CR2032 battery. First, press the side button and remove the emergency key, then pry in the indicated slot with the screwdriver tip. Once the two halves are unlocked, fully open the remote and proceed with the battery replacement, making sure to position the replacement with the negative side facing you.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the GMC Acadia remote control
How to replace the battery of the GMC Acadia remote control
GMC Acadia (2017-2024 / MK 2) Today we will explain how to replace the battery of the smart remote control of the GMC Acadia car, produced from 2017 to 2024. To replace the batter…
How to Replace the Remote Battery for the GMC Acadia?
How to Replace the Remote Battery for the GMC Acadia?
GMC Acadia (2017-2024 / MK 2) To replace the battery in the remote for the GMC Acadia, press the button located on the side of the device so that the emergency key can be extracte…
Where to Find the Main Fuse Box in the 2017 GMC Acadia
Where to Find the Main Fuse Box in the 2017 GMC Acadia
GMC Acadia (2017-2024 / MK 2) In this new guide dedicated to your second-generation GMC Acadia (2017), discover where the main fuse box is located. For safety reasons, before proc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos