Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Acadia
    4. : How to replace the battery of the GMC Acadia key

GMC Acadia - Video tutorial

Model: GMC Acadia MK 2 - Years 2017-2024
Part: Key
Operation: How to replace the battery of the GMC Acadia key

Replacing the battery of the GMC Acadia key (2017-2021) is one of the simplest maintenance operations that you can also carry out in complete autonomy. Just follow the instructions described in our new guide. First of all, locate and press the metal button located on the side of the cover so that you can completely remove the emergency key. Immediately after, get a flat screwdriver and use it to open the cover. Once you have the old battery in front of you, all you have to do is replace it with the new one and finally, reassemble everything correctly. Put the key back inside and you are done.


Posted on 4 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Acadia 2007-2016 - How to solve a problem with the alarm on a 2007 Gmc Acadia? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos