Do it yourself
| ||||
|
GMC Acadia - Video tutorial
Model: GMC Acadia
MK 2
- Years 2017-2024 In this description we can find the indications for replacing the front light bulb on the car. We see below how to proceed: lift the car and break in Oderzo all the opposite side with respect to the position of the lighthouse where the burnt out bulb is present, proceed to remove the screws of the internal mudguard and the relative clips in order to be able to remove it. We will then have access to the rear part of the lighthouse. Once we have identified the bulb to be replaced, we can release it by disconnecting the power connector, extract it from its seat and replace the bulb with the new one, then reposition the bulb holder, hook the connector back on and then reassemble the Clips and fender mounting screws.
Posted on 21 December 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |