Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : How do you replace the front shock absorber on the GMC Sierra?

GMC Sierra - Video tutorial

Model: GMC Sierra MK 2 - Years 1999-2007
Part: Shock absorbers
Operation: How do you replace the front shock absorber on the GMC Sierra?

The replacement of the front shock absorber of the GMC Sierra is done by lifting the car with a jack or a bridge, so that the corresponding wheel does not touch the ground. Therefore, it will be possible to unscrew all the bolts that secure the wheel to its housing, completely removing the latter and accessing the components in its rear part. Here you will find the shock absorber which can be removed by unscrewing the bolts at the top and at the bottom. When the old shock absorber has been removed, it will be possible to insert a new one, re-mounting the wheel as well.


Posted on 21 April 2024 by ScegliAuto



How do you replace the front shock absorber on the GMC Sierra?
GMC Sierra (1999-2007 / MK 2) In order to replace the front shock absorber of the GMC Sierra you have to go and lift the car using a jack or a bridge, so that the corresponding wh
How to replace the cabin filter in the GMC Sierra?
GMC Sierra (2019-2024 / MK 5) In this tutorial we can see how to replace the cabin filter in the GMC Sierra, a very simple and fast operation. The filter is located behind the glo
How to replace the front wipers on the Gmc Sierra
GMC Sierra (2007-2014 / MK 3) Today we will see, in this video tutorial, how to remove and replace the wiper blades of the Gmc Sierra, but also of the Chevrolet Silverado. First,

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos