Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter of the GMC Terrain

Model: GMC Terrain MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Air filter

See other generations:
Video tutorial

To replace the cabin air filter of the GMC Terrain, locate it behind the glove compartment, which will need to be removed from its housing. The glove compartment is held in place by supports, essentially it is under pressure, so you just need to detach it from these supports to remove it. Behind it, you will immediately find the filter access door, which is secured by two 5.5 mm screws that need to be removed to access the filter.

After removing it and cleaning the empty space with a blast of compressed air, reinstall the new filter (paying attention to the direction of the arrows), close the access door, and put the glove compartment back in place. Job done.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a GMC Terrain?
How to Replace the Cabin Air Filter in a GMC Terrain?
GMC Terrain (2018-2025 / MK 2) Replacing the cabin air filter in a GMC Terrain, as shown in this tutorial, is a very simple and quick task. First, sit in the passenger seat, then o…
How to Change Engine Oil in the GMC Terrain?
How to Change Engine Oil in the GMC Terrain?
GMC Terrain (2010-2017 / MK 1) The first step to change the engine oil in the GMC Terrain is to lift the vehicle securely off the ground. Once done, disconnect from inside the cabi…
Where to Find the Cabin Fuse Box of the GMC Terrain 2
Where to Find the Cabin Fuse Box of the GMC Terrain 2
GMC Terrain (2018-2025 / MK 2) To access the cabin fuse box of your second generation GMC Terrain, follow the steps outlined below. First, get inside the vehicle and leave the driv…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos