Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What are the windshield wiper relays in the GMC Acadia?

Model: GMC Acadia MK 1 - Years 2007-2016
Part: Windshield wipers

If the windshield wipers of our GMC Acadia have suddenly stopped working, we can first check the status of the respective relays whose position is indicated in this video. As shown, the relays in question are located in the box inside the engine compartment, under the black plastic cover on the passenger side. They are the last two in the left column, looking at the box from the front. If they are faulty, make sure to use equivalent specifications spare parts and operate with the vehicle turned off, otherwise we could cause damage.

Posted on 9 April 2024 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the GMC Acadia?
What is the fuse layout of the GMC Acadia?
GMC Acadia (2007-2016 / MK 1) In this video we can see where the fuse boxes of the GMC Acadia are located and what their respective diagrams are, useful in case we need to check t…
Where to Find the Main Fuse Box in the 2017 GMC Acadia
Where to Find the Main Fuse Box in the 2017 GMC Acadia
GMC Acadia (2017-2024 / MK 2) In this new guide dedicated to your second-generation GMC Acadia (2017), discover where the main fuse box is located. For safety reasons, before proc…
Position and diagram of the fuse boxes of the GMC Acadia MK1
Position and diagram of the fuse boxes of the GMC Acadia MK1
GMC Acadia (2007-2016 / MK 1) In this video we can see the position and diagram of the fuse boxes of the GMC Acadia MK1: the fuse block of the instrument panel is located on the p…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos