Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the cabin filter of the Greatwall Hover?

Model: Great Wall Hover MK 0 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

Video tutorial

To replace the cabin filter of the Greatwall Hover, you can loosen the screws that secure the glove box on the side of the front passenger so that it can be completely removed: once removed, you can locate the filter box at the back. Here there will be a cover panel that needs to be completely removed: at this point, you can slide out the underlying cabin filter so that it can be replaced with a new one. After replacement, you can reinsert the glove box, making sure everything works properly.


Posted on 25 October 2025 by ScegliAuto


Related tutorials

Great Wall Hover (2006-2012 / MK 0) To replace the timing belt on a Great Wall Hover, open the bonnet to access the components in the engine bay. Here, you will locate the air filter bo…
…
Great Wall Hover (2006-2012 / MK 0) In this video, you will see how to install a multifunction clock on the Great Wall Hover, a component that is not standard on the vehicle. You can fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos