Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Harley-Davidson Street Glide Special?

Model: Harley Davidson Street Glide
Part: Headlight bulb

Video tutorial

As shown in this tutorial, replacing the headlamp bulb on a Harley-Davidson Street Glide Special is an extremely simple and quick task. First, ensure the key is not inserted.

Next, stand in front of the bike, locate the single screw at the bottom of the headlamp, and remove it. Then, take off the chrome ring, unscrew the additional three fixing screws, and separate the headlamp from the base. At this point, simply disconnect the connector, replace the bulb, and reassemble everything by following the reverse procedure.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Harley Davidson Street Glide
How to Replace the Headlight Bulb on a Harley Davidson Street Glide
Street Glide Follow this guide to remove and replace the headlight bulb on your Harley Davidson Street Glide. First, place your motorcycle on a stand and start un…
Replacing the Rear Light on a Harley Davidson Street Glide
Replacing the Rear Light on a Harley Davidson Street Glide
Street Glide In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, p…
Replacing the Front Headlight Bulb on a Harley Davidson Street Glide
Replacing the Front Headlight Bulb on a Harley Davidson Street Glide
Street Glide Unscrew the screw that secures the circular cover of the front headlight at the bottom. This will reveal the three cross-head screws that hold the he…

How to Replace the Clutch on the KTM XCF 450?

To replace the clutch on the KTM XCF 450, loosen the screws securing the corresponding cover located on the right side of the bike. Once the cover screws are loosened, you can remove it to access the underlying clutch. By unscrewing the corresponding bolts, you can extract all the discs that make up the clutch, allowing you to insert the new replacement parts. After inserting them, secure them with the corresponding screws and cover everything back up with the cover.

Watch the video!


by ScegliAuto

More videos