Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Enter the Radio Code in a 2009 Holden Colorado?

Model: Holden Colorado 7 MK 1 - Years: 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

See other generations:
Video tutorial

Have you disconnected the radio from the battery and now it is locked? No problem, to use it again, simply enter the radio code, a 4-digit PIN provided by the dealer when you purchased your vehicle. Locate it among your vehicle documents, and once found, get in your Holden Colorado and turn on the radio.

To enter the required PIN, use the number buttons on the radio itself. If the entered PIN is correct, the radio will start functioning again as before.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from the Holden Colorado 7
How to Remove the Radio from the Holden Colorado 7
Holden Colorado 7 (2011-2024 / MK 2) In today's tutorial, you will learn how to remove and replace the factory radio of the Holden Colorado 7 by following the instructions below. First, …
How to Remove the Factory Radio in the Holden Colorado 7?
How to Remove the Factory Radio in the Holden Colorado 7?
Holden Colorado 7 (2011-2024 / MK 2) Removing the factory-installed radio in the Holden Colorado requires first extracting the lower part that contains the three knobs for the air condit…
Where Are the Fuses Located in the Holden Colorado?
Where Are the Fuses Located in the Holden Colorado?
Holden Colorado 7 (2008-2012 / MK 1) The fuses in the Holden Colorado are located inside the designated fuse boxes installed in the vehicle: in this type of vehicle, you can find two. Th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos