Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the factory radio in the Holden Colorado 7?

Model: Holden Colorado 7 MK 2 - Years 2011-2024
Part: Car stereo

The removal of the factory-installed radio in the Holden Colorado requires first removing the lower part containing the three knobs that control the air conditioning. We use special plastic levers to release this panel from its seat and then pull it outwards with our hands. Now we can use the same tools to remove the radio, but if we have them, it is preferable to use the appropriate radio pliers. We release the radio from both the bottom and the top, extract it, and finally disconnect the plugs.

Posted on 24 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Holden Colorado 7 (2008-2012 / MK 1) We disconnected the car radio from the battery and now it's locked? No problem, to use it again we just need to enter the radio code, a 4-digit pin t…
Holden Colorado 7 (2011-2024 / MK 2) In today's video tutorial we will see how to disassemble and replace the stock car stereo of the Holden Colorado 7, following the instructions below.…
Holden Colorado 7 (2008-2012 / MK 1) After performing the engine oil change on the Holden Colorado, we need to reset the control system that notifies us, with a warning on the dashboard,…

Other guides you may be interested in

Where are the Fuse Boxes on a Smart Fortwo 450?

In this guide, we will look at the location of the fuse boxes on a first series Smart Fortwo 450, along with the fuse diagram. First, locate the internal fuse box, which is found on the driver's side (by removing the plastic panel on the left); then, the guide will illustrate the codes and respective amperages associated with each individual fuse. By unscrewing the three fixing screws with a Torx T10 key, you will access the relay fuse box, with the codes illustrated as in the previous case.

Watch the video!


by ScegliAuto

More videos