Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Holden Captiva

Model: Chevrolet Captiva CG - Years 2006-2018
Part: Warning light – error code

In this video, see how to reset the instrument cluster of the Holden Captiva. The same procedure applies to the Chevrolet Captiva, which is essentially the same vehicle produced under a different brand. Turn on the instrument cluster and within five seconds of turning it on, press and release the accelerator pedal three times, pressing it all the way down each time. At this point, you can turn off the cluster. Wait a moment before turning the cluster back on to check that the warning light has actually turned off and the service has been reset.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2017 Holden Captiva
How to Reset the Service Light on a 2017 Holden Captiva
Chevrolet Captiva (2006-2018 / CG) If the service light on your 2017 Holden Captiva remains illuminated despite a recent service, follow this procedure to eliminate it permanently. Fir…
Where to Find the Fuse Box of the Holden Captiva
Where to Find the Fuse Box of the Holden Captiva
Chevrolet Captiva (2006-2018 / CG) If you don't know where the fuse box containing all the various fuses of your Holden Captiva is located, don't worry. Just read the following guide c…
How to Reset the Service Light on a Holden Captiva
How to Reset the Service Light on a Holden Captiva
Chevrolet Captiva (2006-2016 / CG) To reset the service light on a first-generation Holden Captiva, get in the vehicle, insert the key, and turn it to the ON position to power the inst…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos