Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light in the Honda CRV?

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Service warning light

The deadline for regular maintenance, we are talking about engine oil and oil and air filters, is indicated to the driver by a specific warning light. We are therefore preparing to carry out the above-mentioned work and at the end the warning light must be reset. In the case of the Honda CRV, we take inspiration from the video here, which says to proceed as follows: Turn on the instrument panel, press the button in the odometer several times until you reach the Oil Life option in the onboard computer and finally hold down the same button for a few seconds, causing the reset to occur and the Oil Cancel option to appear.

Posted on 19 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Honda CRV?
How to reset the "Service" light on a Honda CRV?
Honda CR-V (2023-2026 / MK 6, RS) To reset the "Service" light on a Honda CRV, turn on the dashboard without starting the engine. Use the controls on the steering wheel to access the …
How do you turn off the tire pressure light in the Honda CRV?
How do you turn off the tire pressure light in the Honda CRV?
Honda CR-V (2017-2022 / MK 5) Noticing the tire pressure warning light in the Honda CRV, and not only, is synonymous with the presence of problems. The most common causes are punc…
How to Reset the Tyre Pressure Light on a Honda CR-V
How to Reset the Tyre Pressure Light on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this video tutorial, see how to reset the tyre pressure light on a Honda CR-V produced from 2007 to 2012. First, turn on the ignition of the vehic…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos