Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Honda Civic?

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Key

See other generations:
Video tutorial

In order to program the key of the Honda Civic, you will need to insert the blank key into the corresponding slot and turn it to position two: once this is done, you can connect a diagnostic tool to the OBD port of the vehicle, located under the steering column.

Once the connection is made, you will need to follow the instructions on the scanner to ensure that the device is programmed correctly: finally, you will need to disconnect the scanner to verify that everything is working properly.


Posted on 6 September 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Honda Civic
How to Replace the Key Battery of a Honda Civic
Honda Civic (2016-2021 / MK 10) Start by pressing the rear button of the key for your Honda Civic to extract the physical emergency key. Next, using the emergency key as a lever, pr…
How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic
How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic
Honda Civic (2016-2021 / MK 10) On the Honda Civic, resetting the Tyre Pressure Monitoring System (TPMS) is done with the vehicle stationary, with pressures adjusted to the values i…
How to reset the service light on a 2008 Honda Civic?
How to reset the service light on a 2008 Honda Civic?
Honda Civic (2006-2012 / MK 8) Car manufacturers specify a maintenance schedule based on the technical and performance characteristics of their vehicles to avoid serious damage. Th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos