Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob of the Honda Civic.

Model: Honda Civic MK 11, FE, FL - Years 2022-2026
Part: Transmission

To remove the gear knob of the 2023 Honda Civic, we must press on the metal base and the gear boot, then push downwards to remove the base of the knob. After removing the base, pull the knob outwards. Once the knob is removed, it may be replaced or the gear boot may be replaced, or maintenance may be performed on the gear itself. It is important to use an original knob after replacement because some aftermarket knobs may not have the same grip on the mechanism, putting the driver at risk.

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the gear knob of a Honda Civic
Disassembly of the gear knob of a Honda Civic
Honda Civic (2012-2015 / MK 9) Thanks to this very useful video guide today, we can see the step-by-step procedure for disassembling the gear knob of a Honda Civic, ninth generatio…
How to replace the gear knob of a Honda Civic 8
How to replace the gear knob of a Honda Civic 8
Honda Civic (2006-2012 / MK 8) With the help of the following instructional video, we will explain the steps to replace the gear knob on a Honda Civic mk8 model vehicle on your own…
How do you replace the gear knob of the Honda Civic?
How do you replace the gear knob of the Honda Civic?
Honda Civic (2022-2026 / MK 11, FE, FL) In order to replace the gear knob of the Honda Civic, you will need to use an object like a screwdriver to lever down the leather boot around the sel…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos