Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on the Honda Civic?

Model: Honda Civic MK 9 - Years 2012-2015
Part:

In this tutorial, we will see how to reset the tyre light on the Honda Civic, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, go inside the cabin, then insert the key and turn on the ignition. Next, access the general menu using the controls on the steering wheel, enter "Customize settings", "TPMS Calibration", select "Initialize" and confirm your choice. At this point, just complete the procedure by restarting the vehicle.

Posted on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Honda Civic.
How to reset the tire pressure warning light on the Honda Civic.
Honda Civic (2022-2026 / MK 11, FE, FL) Let's see the instructions on how to reset the tire pressure warning light of the Honda Civic. Before performing the recalibration of the TPMS sensor…
How to reset the tire pressure light on the 2014 Honda Civic
How to reset the tire pressure light on the 2014 Honda Civic
Honda Civic (2012-2015 / MK 9) In the following guide dedicated to those of you who own a 2014 Honda Civic, we will explain the steps you need to take to manually reset the tire pr…
How to reset the tire pressure light in the Honda Civic?
How to reset the tire pressure light in the Honda Civic?
Honda Civic (2016-2021 / MK 10) In this tutorial, we can see how to reset the tire pressure warning light in the Honda Civic, which is a very simple and quick operation. Before proc…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos