Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Oil and Oil Filter

Model: Honda Accord MK 8 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle on suitable car ramps. Position a suitable capacity container under the oil sump to collect the used oil, and unscrew the drain plug located at the front: once the draining is complete, re-screw the plug after replacing the washer.

Next, locate the oil filter, which is near the driveshaft, and unscrew it with a metal strap wrench: then apply the new filter after lubricating the seal with oil (it is sufficient to tighten it by hand). Fill the engine with new oil according to the SAE specifications and quantities indicated in the user manual.

Finally, manually reset the service light: - Turn on the ignition without starting the engine. - Press the SELECT / RESET button until the engine oil life indicator is displayed. - Then press the SELECT / RESET button for more than 10 seconds: the engine oil life indicator and maintenance code will flash. - Then press the SELECT / RESET button for more than 5 seconds: the maintenance code will disappear and the "life" of the engine oil will reset to 100. - Turn off the ignition and then start the engine to check if the indicator has been reset.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Power Steering Oil and Filter Replacement
Power Steering Oil and Filter Replacement
Honda Accord (2008-2013 / MK 8) The materials needed for this job include a new filter, special oil, some tools, and a syringe. Remove the air box and its associated hoses. To preve…
Engine Oil and Oil Filter Replacement
Honda Accord (2002-2007 / MK 7) Lift the front bonnet and unscrew the oil filler cap to facilitate draining; position the vehicle on suitable car ramps to ease access underneath. Pl…
How to Change the Engine Oil on a Honda Accord
How to Change the Engine Oil on a Honda Accord
Honda Accord (2008-2013 / MK 8) In this short video tutorial, you will learn how to change the oil and the oil filter on a Honda Accord produced from 2008 to 2013. First, lift the c…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos