Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : How to Change Engine Oil on a Honda Accord

Honda Accord - Video tutorial

Model: Honda Accord MK 8 - Years 2008-2013
Part: Engine oil
Operation: How to Change Engine Oil on a Honda Accord

In this short video tutorial we are going to see how to change the oil and its filter on a Honda Accord produced from 2008 to 2013. To start we need to lift the car and locate the oil pan and the oil filter which it is located immediately next to the cup. We place a basin under the sump and the filter to collect the used oil, now we unscrew the sump cap to let the oil out, remove the old filter and wait for all the oil to drain well. Once everything is drained we can put the nut back on the sump and mount a new filter, once this is done we can put in new oil and we're done with the job.


Posted on 25 November 2022 by ScegliAuto



How do i change Honda Accord engine oil?
Honda Accord (2002-2007 / MK 7) In order to change the Honda Accord engine oil, you need to loosen the oil tank drain plug, which is located in the lower part of the car. By unscrew
How to replace engine oil and filter on Honda Accord
Honda Accord (2008-2013 / MK 8) Let's see how to change the oil and filter on Honda Accord. First open the hood and unscrew the oil tank cap. Lift the car, unscrew the fixing elemen
Changing the engine oil on a Honda Accord mk7
Honda Accord (2002-2007 / MK 7) In the short video tutorial in question we are going to see how to change the oil and the relative filter on a Honda Accord mk7, model produced from

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos