Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change in the Honda Accord

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

As usual, before proceeding with the engine oil change on your Honda Accord, secure the vehicle on a stable and safe surface, either on a ramp or flat ground, to ensure the operator's safety. This precaution should be taken whenever performing maintenance on a car. Now, open the front bonnet of the engine compartment and remove the oil filler cap. Under the car, place a container under the oil drain hole, unscrew the bolt, and let all the oil drain out. At this point, unscrew the oil filter and replace it with a new one, after lubricating the seal.

Close the drain hole and pour the new oil into the filler neck. And you're done!


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Honda Accord
Resetting the Service Light on the Honda Accord
Honda Accord (2002-2007 / MK 7) The instructions in this guide will show you how to reset the service light for the routine maintenance oil change on the Honda Accord. First, get in…
Changing the Oil Filter and Engine Oil in a Honda Accord
Changing the Oil Filter and Engine Oil in a Honda Accord
Honda Accord (2002-2007 / MK 7) As you should do every time you want to perform maintenance on a car, place your Honda Accord in a stable and secure position, either on a ramp or on…
Resetting the Service Light on a Honda Accord
Resetting the Service Light on a Honda Accord
Honda Accord (2008-2013 / MK 8) In today's video, see how to reset the engine oil service light on an eighth-generation Honda Accord produced from 2008 to 2013. First, turn on the v…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos