Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Side Step Installation Instructions

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Body

Lift the vehicle on a lift and detach the plastic covers on both the right and left sides, in the central area of the vehicle, by removing the plastic fasteners. On the same covers, identify the dotted area and cut it out using a jigsaw. Then position the support brackets for the side steps and secure them to the vehicle's chassis with the appropriate bolts. At this point, attach the side steps and secure them to the brackets with the supplied flanges, ensuring the pins are tightened properly. Reattach the previously removed plastic covers.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Side Steps
Installation of Side Steps
Honda CR-V (2012-2017 / MK 4) For the modification, you need to obtain the original side steps, then position the vehicle on a ramp and start the work by removing the protective c…
Instructions for Installing LED Headlights
Instructions for Installing LED Headlights
Honda CR-V (2012-2017 / MK 4) Replacing the headlight bulbs with LED rather than xenon will give the vehicle a more modern and appealing look while improving visibility; open the …
Replacing the Front Headlight Bulb on the Honda CR-V
Replacing the Front Headlight Bulb on the Honda CR-V
Honda CR-V (2017-2022 / MK 5) Today's guide will show you the steps to remove and replace the front headlight bulb on the Honda CR-V. First, open the bonnet of the vehicle and sta…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos