|
Do it yourself
| |||
| ||||
How to Reset the Airbag Light on a 1999 Honda CR-V
Model: Honda CR-V
MK 1
- Years 1995-2001
Today, learn how to reset the airbag light on a 1999 Honda CR-V. Get into the vehicle and, while keeping the ignition off, remove the glove compartment on the driver's side to access the fuse box. Above the fuse box is the airbag connector; disconnect the cable and pull out the wire. Insert a previously prepared U-shaped paperclip into the connector. Turn on the ignition and turn it off after a few seconds. Turn on the ignition, remove the paperclip, and turn off the ignition; repeat this process four times in quick succession. With the ignition off, remove the paperclip and turn on the ignition. If error codes appear on the display, it means you need to visit an authorised workshop for a check, as the airbag may not be functioning correctly. If the airbag light is off and there are no error codes, you can continue to use the vehicle normally.
Posted on 8 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Honda CR-V
(2002-2007 /
MK 2)
In today's tutorial, you will learn important information regarding the resetting of the airbag (SRS) light on a Honda CR-V. First, get inside the ca…
Honda CR-V
(2023-2026 /
MK 6, RS)
Today, you will learn how to reset the service light on a 2025 Honda CR-V. Press the ignition button twice in quick succession, then press the menu b…
Honda CR-V
(2017-2022 /
MK 5)
In this video tutorial, you can see how to reset the service light on a Honda CR V through a step-by-step procedure for proper vehicle management. Fi…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.175
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |